Türkiye geneli kargo ₺95 ₺3.000 üzeri kargo bedava
Sand beige 3D printed wedge razor stand on white, holding a chrome knurled handle safety razor, with a matching beige sliding blade case seated in the central trough.
Three quarter view of the beige stand and razor, the matching blade case in the trough carrying an embossed maker logo on its lid.
Side view of the beige wedge with the chrome razor lying across it, showing the ramp profile and the blade case flush in the trough.
The beige stand and its blade case photographed empty beside the razor, showing the two saddle notches and the embossed lid of the sliding case.
Sand beige printed razor stand on white with a chrome safety razor standing behind it, the trough carrying an oval plaque reading 514Printed.
Beige wedge stand holding a chrome razor along its saddles, with a dark printed blade card marked CRK and a line about standard double edge razors slid into the trough.
Beige shaving stand with the dark CRK blade card seated in its central trough, the chrome razor standing upright behind the empty saddles.
Chrome safety razor resting on the sand beige stand, with an orange Merkur Super Platinum blade packet tucked into the trough beneath the handle.
Low close view of the beige stand from the front, razor head to the left and the orange and white blade packet clearly visible in the slot below the handle.
Sand beige razor rest holding a knurled chrome razor with the head raised, the oval 514Printed plaque sitting in the trough under the handle.
Slightly higher angle of the beige stand with the chrome razor lying across it, showing the front notch, the raised rear saddle and the matte printed surface.
Front three quarter view of the sand beige stand with the chrome razor head to the left, the plaque reading 514Printed set into the trough below the handle.

Merkur 34C Tıraş Makinesi Standı

₺659.00

Merkur 34C emniyetli tıraş makinesi için ölçüsüne göre tasarlanmış stand. Jilet kutusu yuvası vardır ve Merkur Progress 500 ile de uyumludur.

Stok kodu: publisher-DLP-1786380751103181000 Kategoriler:

Açıklama

Merkur 34C emniyetli tıraş makinesini sergilemek için tasarlanmış zarif stand. Jilet kutusu yerleştirmek için entegre bir yuvaya sahiptir. Merkur Progress 500 tıraş makinesiyle de uyumludur.

Kargoya verme: 2-3 iş günü

Ek bilgi

Ürün Tipi

Tıraş Standı
Malzeme

3D Baskı
Uyumluluk

Merkur

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Merkur 34C Tıraş Makinesi Standı” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Bu site istenmeyenleri azaltmak için Akismet kullanır. Yorum verilerinizin nasıl işlendiğini öğrenin.

İlgili ürünler